Bora Care with Mold-Care
BoraCare with Mold-Care (Insecticide, Fungicide & Termiticide)
BoraCare with Mold-Care combines BoraCare with Mold-Care. It protects the surface, killing all forms of fungi (including mold). As a borate-based wood preservative, it renders treated wood impervious to termites and other wood destroying insects, as well as wood decay fungi. It also disinfects and sanitizes the treated areas.
When used together, BoraCare with Mold-Care creates a highly effective, residual solution to insects and mold. It penetrates into the wood where it delivers residual protection for years. It is the only EPA-registered product that will not only kill mold and insects, but prevent mold from growing on wood surfaces
Inhibits Mold Growth & Stops Wood Destroying Insects-Inside Out Protection
Mold-Care prevents the growth and establishment of mold, dry rot or wet rot. It has been formulated to work with BoraCare. It will add protection from wood destroying insects such as Termites, Powderpost Beetles, Anobiid Beetles, Old House Borers and Decay Fungi for years. Application of BoraCare with Mold-Care can be used on bare wood, drywall, particleboard or OSB. This product is designed to penetrate wood; it doesn't just remain on the surface. It will penetrate and absorb into the interior of the wood for inside out protection.
Only available online.
Can not be shipped to AK, NY, or WA. Can not be shipped by air (Ground Only)
As a concentrate, BoraCare dilutes with water before use. To aid in the mixing process use warm or hot water, if available. An impeller-type mixer that can be used with an electric drill will aid the mixing.
Mix 1 pint of Mold-Care with 1 gallon of BoraCare in 5 gallons of water. For mold control, mix 1 pint of Mold-Care with 1 gallon of BoraCare in 5 gallons of water following the methods below:
A. Hand Sprayers: Mix in a separate clean container such as a 5 gallon bucket, then pour mixed solution into a spray tank. You can cause blocked hoses and nozzles, by mixing directly in the sprayer tank.
B. Hand Volume Pumping Systems: Add all the water to the tank, first, then start the recirculator. Add BoraCare and Mold-Care Concentrate slowly. Continue mixing until it is uniform.This mixed solution will remain stable for up to 30 days.
Cautions: Remove pressure from spray tanks before leaving unused solution overnight. After using BoraCare with Mold-Care, flush or clean lines and equipment.